Buy a NetComm NTC-140W 4G LTE M2M Router 100 MBps DUAL WAN?

Option:
€ 399,- NTC-140W-02 € 579,- NTC-140W-02 + PSU-0039
Auf Lager

Ohne MwSt:	€ 329,75
Anzahl:
Summe:	€ 399,-

Description:

The NetComm Wireless NTC-140-W-02 4G WiFi M2M Router utilises the speed and performance capabilities of a LTE/4G network to deliver seamless M2M connectivity for a broad range of M2M applications. The NTC-140W-02 features two Gigabit Ethernet ports and high speed WiFi connectivity making it an ideal device for high speed networking. The device also features vehicle voltage support, GPS and Ignition input making it ideal for mobile assets and transportation applications.

The NTC-140W creates point-to-point and point-to-multi-point communication enabling the secure collection and analysis of data from remote and unmanned applications.

The NTC-140W’s powerful processor delivers optimal performance and its embedded NetComm Linux OS and Software Development Kit (SDK) offers the end user the capability to install custom firmware to the on-board flash memory via the programming interface. Built in VPN clients also ensure a secure connection over a public mobile network.

Its polycarbonate and rubber enclosure is mountable, designed for rugged deployments and also features temperature tolerances making it ideal for remote and industrial environments. The device also features 1 x I/O and USB OTG.

Perfect for:

Industrial deployments in harsh environments. Primary and backup Internet connectivity
Controlling and monitoring of connected machines from remote locations
Collection and analysis of data from connected machines
Point-to-point or Point-to- multipoint Machine-to-Machine communications

Key features:

Powerful and flexible industrial cellular router platform supporting Frequency Division Duplexing LTE, DC-HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, CDMA and GNSS connectivity.
Ideal for providing primary and backup wireless connectivity over LTE networks
Industrial Features – rugged enclosure, wide operating temperature range, wall mount option and a flexible range of power options
Embedded Linux operating system allowing for the installation of custom applications. Software Development Kit (SDK) is available
Web interface for easy centralized configuration and management from any PC
Two 10/100/1000 Base T ports for Ethernet connection
VPN support for establishing a secure connection over public cellular network using OpenVPN
Supports SNMP with cellular specific MIB, PPPoE, RIP, VRRP, DDNS, MAC/NET address filtering, Open VPN, DHCP/DHCP relay
System monitoring, remote diagnostics and configuration over the air, diagnostic log viewer via browser
802.11n WiFi access point or client with 2x2 MIMO antenna technology
Integrated GPS support
TR-069 device management
Ignition Sense capability for graceful shutdown and startup in vehicle applications
Configurable power save mode with minimum current draw when not operational
Tested for vehicular applications IEC Class 5M2 and MIL-STD-810F Method 516.5

In the Box:

1 x Netcomm NTC-140W 4G M2M Router

1 x Power Supply cable with molex plug

2 x Broadband antennas

2 x WiFi antennas

1 x Ethernet cable

1 x Din Rail Mounting Bracket

1 x Quick start Guide

1 x Wifi Security Card

Processor & Storage
Powerful 720Mhz ARM8 processor with 128MByte DDR2 RAM
256MByte Flash memory storage (~120MB available on board space for user storage)
microSD card slot for expandable storage

Operating System
Embedded Linux & Software Development Kit (SDK)

Peak DATA speed
Multi-band FDD capable LTE data rates: Category 3
Downlink:100 Mbps (20 MHz bandwidth), 50 Mbps (10 MHz bandwidth)
Uplink:50 Mbps (20 MHz bandwidth), 25 Mbps (10 MHz bandwidth), CDMA EVDO Release 0 and EVDO Release A
Downlink: Up to 42 Mbps (category 24)
Uplink: Up to 5.76 Mbps (category 6) GSM/GPRS/EDGE
EDGE throughput up to 236 kbps, CDMA IS-856 (1xEV-DO Release A)
Up to 3.1 Mbps forward channel
Up to 1.8 Mbps reverse channel CDMA IS-2000
Up to 153 kbps, simultaneous forward and reverse channel, Circuit-switched data bearers up to 14.4 kbps, UMTS (WCDMA)/HSDPA/HSUPA/HSPA+/DC-HSPA+, HSPA+ rates
Downlink: Up to 42 Mbps (category 24)
Uplink: Up to 5.76 Mbps (category 6) GSM/GPRS/EDGE
EDGE throughput up to 236 kbps

Cellular Bands
LTE	B2 (1900 MHz), B4 (AWS) (1700 / 2100 MHz), B5 (850 MHz), B13 (700 MHz), B17 (700 MHz), B25 (1900 MHz G Block), CDMA (EVDO Release 0 and EVDO Release A): BC0 (Cellular 800 MHz), BC1 (PCS 1900 MHz), BC10 (Secondary 800 MHz)
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:	B1 (2100 MHz), B2 (1900 MHz), B4 (AWS 1700/2100 MHz), B5 (850 MHz), B8 (900 MHz)
GSM/GPRS/EDGE:	GSM 850 (850 MHz), EGSM 900 (900 MHz), DCS 1800 (1800 MHz), PCS 1900 (1900 MHz)
GNSS	GPS: 1575.42 MHz, GLONASS: 1602 MHz

Connectivity
2 x 10/100/1000 Base-T Ethernet RJ45 ports with Auto MDIX
Micro USB 2.0 OTG interface with 0.5A supply capability
1 x multipurpose I/O pin

SIM card reader
Lockable Tray Reader with Push-Button-to-Release * optional soldered-down SIM (ETSI MFF2 DFN-8 USIM)
Supports Mini USIM/SIM Format (2FF)

Reset button
Reset button (recessed, requiring pen/paperclip) with three functions: Reboot, reboot into recovery mode, and reset unit to factory defaults

Antenna connectors
2x SMA connectors for 3G/4G (1x Main and 1x RX Diversity)
2x Reverse SMA connectors for Wireless LAN (MIMO)
1x SMA connector for GPS

LED indicators
Tri-colour (Red/Amber/Green) LEDs. Power, WLAN, Mobile Broadband, Service Type and Signal Strength indicators
Easy and clear LED status display for connection status, connected network type, and connection errors

Cellular
Profile managed packet data connections
NAT Disable for framed route configuration
Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
SIM Security Management (PIN configuration, enable and disable)
Automatic and manual cellular band selection
Automatic and manual operator selection

GPS
Embedded GPS receiver (1575.42Mhz)
SMA Connector for external passive or active GPS Antenna
Active antenna voltage: 3.05V
Maximum current: 50mA
Under open sky: Tracking sensitivity -161 dBm, Acquisition sensitivity -145 dBm
Cold start sensitivity: -145dBm
Time to first fix (TTFF): Cold 32s, Warm 29s, Hot 1s

WIFI/WLAN
High throughput and extended range 802.11n 2T2R WiFi with transmission speeds up to 300Mbps

Network & routing
Static Routing, RIP (v1/v2), Port Forwarding and DMZ
Dynamic DNS
VRRP for redundant router failover
DHCP Server including : Address reservation by MAC address, Custom DNS server definitions, DHCP Relay, DHCP list display in Web-UI, Advanced DHCP Option configuration (Option 42 NTP, Option 66 TFTP, Option 150, Option 160)
Data Stream Manager providing ability to create mappings between input and output ports (e.g. Serial Port, SMS, GPS, USB) and perform required translation or data processing by each virtual tunnel.
Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to 247 slaves connected to the Serial TCP/IP Gateway.
Modbus RTU/ASCII frames support

VPN
PPTP Client for VPN connectivity to remote PPTP VPN Server
IPSec tunnel termination (for up to 5 tunnels)
GRE Tunnelling
OpenVPN (Client, Server and P2P)

Temperature
Operating Temperature Range (Class A): -30ºC to +70ºC
Operating Temperature Range (Class B)*: -40°C to +85°C

Power supply
Power input and I/O via 4 way Molex mini-fit connector
DC Power (8 - 40V DC)
1x dedicated ignition input on 4 way connector
Minimum power input rating of 6W via 4 way mini-fit connector. Recommended power input 12V 1.5A.
Vehicle compatible protection on DC Input Jack. (ISO7637 standard)

Dimensions & weight
143mm (L) x 107mm (W) x 34mm (D) / ~235g (excluding external antenna)

Mounting options
Wall mount support in multiple orientations via embedded mounting holes, DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)

Certifications
ISO7637, FCC; IC; PTCRB; RoHS; WEEE

For Administration/configuration, Software and firmware specifications see the SpecSheet at downloads.

Bewertungen über NetComm NTC-140W 4G LTE M2M Router 100 MBps DUAL WAN

Erfahrungen mit und Meinungen über NetComm NTC-140W 4G LTE M2M Router 100 MBps DUAL WAN.Es gibt noch keine Bewertungen über NetComm NTC-140W 4G LTE M2M Router 100 MBps DUAL WAN. Sie können der Erste sein eins zu Schreiben.

Eine Bewertung schreiben